Toro 51668 Installation Instructions

Toro <a href=51668 Installation Instructions" width="" />

Read the Operator's Manual and follow all safety instructions.

1. Read the Operator's Manual; wear eye protection.

Installing the Extension

Tube Assembly

On Toro Axial Blowers

Shut off the machine and disconnect any power

Remove the blower tube so that the collar can

connect directly to the blower outlet

Slide the collar over the outlet and secure it by

tightening the connection strap.

Use the small collar for 3 to 4 inch (7.6 to 10.2

cm) diameter outlets, use the large collar for 4 to

5 inch (10.2 to 12.7 cm) diameter outlets.

1. Blower housing outlet

2. Universal connection strap

© 2020—The Toro® Company

8111 Lyndale Avenue South

Bloomington, MN 55420

3. Large universal

connection collar

Register at www.Toro.com.

Install the flex tube and extension tubes to the

collar as shown in C and E of

Installing the Extension

Tube Assembly

On Toro Blower Vacs

decal133-0491

bumps at the end of the threads.

Form No. 3439-635 Rev A

Installation Instructions

Tighten each extension tube over the

Original Instructions (EN)

All Rights Reserved *3439-635* A

Printed in China

Related Manuals for Toro 51668

Operation manual (17 pages)

Ultra blower/vacuum (13 pages)

Serial no. 318000001 and up (8 pages)

40v max axial blower (12 pages)

Axial blower (12 pages)

40v max axial blower (37 pages)

Vacuum (25 pages)

Rake and vac and super blower/vacuum (17 pages)

Rake and vac and super blower/vacuum (10 pages)

Ultra blower/vacuum (29 pages)

Ultra blower/vacuum (8 pages)

Summary of Contents for Toro 51668